This map was created recently by Paul Butler, an intern at Facebook [via]. Roughly, the lines on the map represent Facebook connections between different cities.
I think we would best learn from this map if we compare it to two others. The first is the famous Earth at night picture:
Wow, they look pretty similar, you might say, after focusing first on the bright hubs of North America and Europe. But there are three major exceptions: China, Russia, and the Middle East. (There are other noticeable holes like Bangladesh and Vietnam.) Asia looks pretty dim on the Facebook map. Sure, it has India, South Korea, Japan, and Southeast Asia lit up, but you can see a giant hole, devoid of light, a pit where, in many of the places, Facebook is banned.
Again there is quite a close overall match with the Facebook map. And yet again, there is a disparity in China, Russia, and the Middle East, and in Africa.
We can also derive graphically that the percentage of people who use Facebook in North America. is much higher compared to the rest of the world. Compare, for example, the eastern half of the United States and the entirety of India. Though India has over three times the population of the United States, the Facebook connections in the eastern United States alone outshine India’s vastly.
As seen from the map, Australia’s eastern coast plus New Zealand also have a disproportionately high percent of Facebook users.
Before I finish, I’d like to show just one more image: the Facebook map zoomed into the United States:
Damn, that’s home, for me, and for most likely the vast majority of my readers. YOU are on that diagram. You probably have a Facebook, and you are connected to this virtual map. It is not a physical map. That was in an old, ancient age. With Zuckerberg officially recognized, named above other world leaders, it is an appropriate time to say that this moment, this year of 2010, is the year that we can officially turn back and say that we’ve exited an old phase of society. A new one, THAT one, in the picture above you, has replaced it.
It’s basically the WarCraft III editor. Plus a lot more.
The point of this post is a comparison between the WarCraft III (WC3) and StarCraft II (SC2) editors. Of course, because SC2 is in beta right now, along with its editor, many things may change. The general idea, however, should stay about the same, and moreover, it is the overall resemblance between the two editors that prompted this post.
I speak from several years of experience with the WC3 editor, and with two very extensive and elaborate maps under my ownership (one self-owned, one co-authored).
My map making started with SC1, and I must say that the WC3 editor is vastly superior to that of SC1. To put the WC3/SC2 editor comparison into context, I shall first go over the basics of the SC1 editor.
SC1’s editor was far more powerful than others in the time period in which it was released—StarCraft debuted in 1998. The editor’s main strength was the Trigger Editor, which allowed the creator to script the action of a map according to events that happen in the game. The events, however, were not called events—they were called conditions, and this made sense for SC1. Hence, the SC1 Trigger Editor relied on a condition-action schema.
Also powerful was the Unit Editor, with which a user could modify the basic stats of a unit or building:
Note, however, that this only allows very basic modification. If I wanted to change the attack speed, attack range, attack animation, movement speed, collision size, building options, etc. of a unit, I would be at a total loss with the StarCraft 1 editor.
Within just four years, in 2002, Blizzard released WarCraft III, which came with a much, much more capable editor.
Note carefully the icons in the terrain palette in the screenshot above, particularly the ones for “Apply Height.”
Basically, the WC3 editor can produce beautiful terrain. But that’s not the point. Its Trigger Editor is incredibly more complex than that of SC1, and this is where the superiority shows. Here is a screenshot of the WC3 Trigger Editor:
Okay, the screenshot is not that impressive, but keep it in mind when we compare it later to SC2’s editor. Do note the Event-Condition-Action schema. Finally, here’s the WC3 Object Editor:
This is much more impressive than SC1’s editor, which only lets me change ten integers and a name at max. Note that the screenshot by no means captures the whole list of customizable attributes: look at that scroll bar! Surprisingly, most StarCraft 1 players seem to not know about this power—most of them have no idea how powerful the WC3 editor is.
After all, one of the few World Cyber Games (WCG) game is Defense of the Ancients, more commonly known as DotA. And yep, it was created by the WC3 editor. It appears in fact on Battle.net that more WC3 players play DotA than the actual WC3 ladder.
To further reiterate the power of the WC3 editor, I present to you a demonstration of custom spells I made a long time ago in WC3.
This is far beyond the dreams of a StarCraft 1 map maker. Now, as I mentioned in an earlier post,
. . . I was appalled when SC players and map makers posted numerous questions [on the Blizzard forums] asking whether the SC2 editor will have certain features; Blizzard just said yes, yes, yes. In one of their FAQs, they had the question along the lines of, “Will the editor be able to—,” with the answer, “Yes.” The reason the questions were appalling was because nearly every single feature requested was already in the WC3 map editor, released five years prior to the announcement of SC2.
And if SC2 is released later this year, in 2010, it will have been eight years since the release of WC3. That’s double the time between SC1 and WC3. This means the jump in editor capability from WC3 from SC2 should be twice as high as that between SC1 and WC3, right? Well, it was certainly an improvement, but not a shattering one.
I opened up the SC2 editor for the first time today. My first thought was, Wow, this looks like WC3. In contrast, I was not suddenly reminded of SC1 when I first opened the WC3 editor. Here’s a screenshot of the SC2 editor: (I recently got a new laptop, and hence the Windows 7 theme in the following pictures will look different from the Windows XP theme you saw in the preceding ones, as I have SC1 and WC3 on my old laptop, and SC2 on the new.)
Remember those “Apply Height” icons I told you to remember a few screenshots back? Well, here they are again. It turns out the SC2 terrain editor is very similar to that of WC3. After all, WC3 already allowed beautiful 3D maps, and there wasn’t an incredible amount of room to improve upon.
Okay, now I never really cared too much about terrain in the first place. So naturally, my first instinct was to go to the Trigger Editor. You can imagine the surprise I felt when I saw this:
Not only are the icons and interface the same, but so is the Event-Condition-Action schema! You’ll notice the “Local Variables” as well, but I assure you, from WC3 editing experience, that it is nothing new: Blizzard just made local variables a little more friendly to use. Now, this resemblance really says one thing: not that SC2’s editor isn’t powerful, but that WC3’s editor was so powerful that they had little to improve upon.
I don’t have this in the screenshots, but once you go to add events, conditions, or actions, the interface does change a little. Overall it is very easy to adapt to, from a WC3 perspective. I think it’s actually a little more user friendly: in WC3 you often had multiply nested fields in a trigger, and to modify a single one would require peeling away the layers, which would require several clicks; in SC2 this requires just one click no matter how many layers of nesting occur, because all the fields are written out. Of course, to more advanced WC3 mapmakers this is not a problem because of JASS scripting, but it is an improvement nonetheless.
What about the SC2 Object Editor? Here’s a screenshot:
It’s actually called the Data editor in SC2. For consistency, I have screenshot the place where you change a unit’s hitpoints for each of the three editors, and you see quite a change on each one. Unlike the very familiar trigger editor, the Data editor does take a while to get used to. Its basics are, however, the same. The right-hand-side panel looks very similar between the WC3 and SC2 data editors (for now I’ll refer to both of them as data editors), and even the left-hand-side is not totally different. If anything, the WC3 data editor is more organized, by both type of data (unit, item, doodad, destructible, ability, upgrade) and within each type (units categorized by race and role); in SC2 all the data is there in one big list.
Alright, that’s my first look at the SC2 editor. I’m not incredibly impressed so far, but I do think it has great potential. After all, SC2 is still in beta, and there are two more expansions coming out. And from the experience of StarCraft: Brood War and WarCraft III: The Frozen Throne, expansions tend to make editors way better.
I’ll probably be messing around with the editor a bit in the upcoming days or weeks, if AP/IB tests allow. I’ll let you know if there’s anything bizarre.